Temperature compensation - Temperature sensor used for the Mi TDS Pen.
-What is TDS?
Total Dissolved Solids (TDS) are the total amount of mobile charged ions, including minerals, salts or metals dissolved in a given volume of water, expressed in units of mg per unit volume of water (mg/L), also referred to as parts per million (ppm). TDS is directly related to the purity of water and the quality of water purification systems and affects everything that consumes, lives in, or uses water, whether organic or inorganic, whether for better or for worse.
-Why Should You Measure the TDS Level in Your Water?
The EPA Secondary Regulations advise a maximum contamination level (MCL) of 500mg/liter (500 parts per million (ppm)) for TDS. Numerous water supplies exceed this level. When TDS levels exceed 1000mg/L it is generally considered unfit for human consumption. A high level of TDS is an indicator of potential concerns, and warrants further investigation. Most often, high levels of TDS are caused by the presence of potassium, chlorides and sodium. These ions have little or no short-term effects, but toxic ions (lead arsenic, cadmium, nitrate and others) may also be dissolved in the water.
Even the best water purification systems on the market require monitoring for TDS to ensure the filters and/or membranes are effectively removing unwanted particles and bacteria from your water.
-Mi TDS Pen
Recently, Xiaomi Inc. has launched the Mi TDS Pen, which accompanies the Mi Water Purifier.
Mi TDS Pen- Detects home water quality, determines if water purification is required. Reacts to organic compounds, heavy metals and soluble salt content. Automatic temperature calibration, precision measuring.
-Why the Mi TDS Pen requires temperature compensation?
Because the water temperature will affect the test results, so in the process of detection, It requires a temperature sensor for temperature compensation.
Through the temperature compensation, it can ensure accurate measurement results.